十全手指式血氧機 血氧飽和監視器

描述

Technical Specification

顯示格式 LED顯示

血氧飽和度 測量範圍 35%~100%

脈搏率 測量範圍 30~240bpm

脈搏波強度顯示 棒圖顯示

電池電量顯示 LED符號

電源要求 2個四號1.5V鹼性電池

電壓工作範圍 2.2~3.6伏功耗不大於60毫安培

解析度血氧飽和度±1%，脈率 ± 1bpm**測量精度

血氧飽和度在70%~100%段為±2%*小於70無定義

功能開關，用於打開儀器，在無手指插入時5秒內自動關機。

Instructions

1. Install alkaline battery (Lead-acid battery may leak corrosive fluid which maydamage the Oximeter)-Insert two No. 4 (3A, 1.5V) taking note of polar ends as displayed-Slide in the battery cover case2. To test blood oxygen concentration:-Press the “ON” button to start the Oximeter-Open the finger probe by squeezing the hinge end, insert your index finger (with yournail facing up) into the finger probe and release the hinge. Make sure your index fingertouches the end of the probe-To turn off the machine, release your finger from the finger probe and press the“power” button. The machine will switch off in about 3 seconds3. Touch Screen Portable Pulse-Oximeter explanationi. Power button (changes display screen)ii. Oxygen concentration indicatoriii. Pulse indicatoriv. Heart rate indicator-Display formati. Oxygen-blood concentration (SPO2): 35-99%ii. Pulse (BPM:Pulse) 30 – 240min/Pulseiii. Pulse wave display: horizontal 6 wave formativ. Low power indicator: “Low Battery” message will appear on screen4. Caution:-Please remove nail polish or any other cosmetics from your nail before using theoximeter-It not recommended for the test subject to have long nails as this may interfere withthe accuracy of oximeter-It is recommended that index, middle or ring finger be used to be tested. Fingers thatare too cold, thick, or thin may hamper the accuracy of the result-Please ensure that during testing, the finger does not wiggle or move, and that thetest subject remains stationary to ensure accurate result